>>Military Connectors
Military Connectors2018-03-19T15:29:52+00:00

Military Connectors

Many of the types of Military Connectors supplied by us have been known for many years, and as such are referred to by a surprising number of names and descriptions. The usage of the word Military can also be a misnomer when it has been common for these connectors to be used in a variety of commercial applications.

Suffice to say, if you have a part number, or merely a description of what Military Connectors you need, then please contact us and we will do our very best to not only identify the Military Connectors concerned but will also be happy to provide you with a quotation albeit it for just one piece or a thousand. Please contact us for further information.

Below is a small selection of our most popular Military Connector though we can supply from a large range.

 

2018-03-19T15:29:54+00:00

D38999 SERIES 3

A threaded coupling connector made in 9 shell sizes utilising 100% scoop proof contacts. EMI/ RFI shielded with grounding rings are standard. Available in Aluminium and Composite shells, the latter of which can reach 2000 hours of salt spray resistance. Now one of the most widely used connectors from the 38999 family. Known under part numbers:

  • D 38999/20
  • D 38999/24
  • D 38999/26/TV/TVP/KJA/8D
  • CONTACTS: 2 TO 128 from sizes 12 to 22D-STANDARD MILC39029 CONTACTS SHELL SIZE: 9 TO 25
  • TEMPERATURE:FINISH: “W” -65 DEGREES C TO 175 DEGREES C
  • “F” -65 DEGREES C TO 200 DEGREES G TERMINATION:CRIMP CONTACTS
  • INSULATOR: HIGH GRADE PLASTIC
  • DURABILITY: 500 MATING CYCLES
  • OPERATION: BETWEEN SEA LEVEL AND 100,000 FEET
2018-03-19T15:29:54+00:00

38999 SERIES 2

A low profile bayonet connector which utilises a shorter contact than those employed in the 38999 series 1 and III. Useful for instrumentation applications where high density circuitry is required and where limited space can pose a problem. Non scoop proof contact design. Known under part numbers:

  • MS 27473T
  • MS 27474T
  • MS 27484T
  • MS 27472T/JT/KJ/8T
  • CONTACTS: 2 TO 128 From sizes 12 to 22D
  • SHELL SIZE: 8-24
  • TEMPERATURE: : FINISH: “A” BRIGHT CADMIUM OVER ELECTROLESS NICKEL PLATE:-65 DEGREES C TO 150 DEGREES C
  • “B” OLIVE DRAB CADMIUM OVER ELECTROLESS NICKEL PLATE: -65 DEGREES C TO 175 DEGREES C
  • “F” ELECTROLESS NICKEL -65 DEGREES C TO 200 DEGREES C
  • TERMINATION: CRIMP CONTACTS
  • INSULATOR: HIGH GRADE PLASTIC
  • DURABILITY: 500 MATING CYCLES
  • OPERATION: BETWEEN SEAL LEVEL AND 100,000 FEET
2018-03-19T15:29:55+00:00

38999 Series 1

The 38999 series 1 is a high impact shock resistant bayonet connector which can be used for either general purposes or in a situation where environmental sealing is a requirement. EMI/RFI Shielding with grounding fingers. Scoop proof contacts and shell withstands 500 hours salt spray in cadmium plate version. Known under part numbers:MS 27467T/MS 27468T/MS 27656T/MS 27505T LJT/KJL/8LT

Further Technical Information

  • CONTACTS: 2 TO 128 from sizes 12 to 22D-STANDARD MILC39029 CONTACTS SHELL SIZE: 9-25
  • TEMPERATURE: FINISH : “A” BRIGHT CADMIUM OVER ELECTROLESS NICKEL PLATE: -65 DEGREES C TO +150 DEGREES C
  • “B” OLIVE DRAB CADMIUM OVER ELECTROLESS NICKEL PLATE: -65 DEGREES C TO 175 DEGREES C
  • “F” ELECTROLESS NICKEL -65 DEGREES C TO 200 DEGREES C
  • TERMINATION: REAR RELEASE CRIMP SNAP IN CONTACTS
  • INSULATOR: HIGH GRADE PLASTIC
  • DURABILITY: 500 MATING CYCLES
  • GROUNDING SPRING: BERYLLIUM COPPER
  • OPERATION: BETWEEN SEA LEVEL AND 100,000 FEET
2018-03-19T15:29:55+00:00

MIL-C-26482 SERIES 2

(PATTERN 602/MS347*)

This is the uprated rear release crimp version of the MILC26482 Series 1 connector. These have a rigid di-electric front insulator and a silicone rubber sealing which is a great improvement over the polychloroprene rubber of the series 1.
Supplied in this country under the Pattern 602 part numbers and known in the U.S.A. as MS347* parts this is a widely used Military Connector which is readily available. Can be supplied in Olive drab green or Nickel as required. A grounded version known as MS3475 is also available. Known under part numbers: 6020/6026/6027 MS 3470/MS 3476/MS 3471/MS 3474

  • Contact: 3 TO 61
  • Temperature: -55degreesC TO 200degreesC
  • Termination: Rear release crimp
  • Insulator: Rigid dielectric from
  • Grommets and seals: Silicone rubber
  • Finish: Olive drab chromate over cadmium or nickel if preferred
  • Connection nut: Bayonet
2018-03-19T15:29:55+00:00

MIL-C-26482 Series 1 Connector

A well known connector which was originally designated “pygmy connector”, an appellation well deserved as it is both small yet can carry a large number of contacts. Known under part numbers:PT/KPT/62GB/YH/MS311*
Further Technical Information

  • CONTACTS: 2 TO 61
  • TEMPERATURE:-55 DEGREES C TO + 125 DEGREES C
  • TERMINATION: SOLDER OR CRIMP
  • INSULATOR: POLYCHLOROPRENE
  • GROMMET & SEAL: POLYCHROLOPRENE
  • FINISH: OLIVE DRAB CHROMATE OVER CADMIUM OR NON CADMIUM IF REQUIRED
  • CONNECTION NUT: BAYONET-THREADED TYPES ARE AVAILABLE BUT SUBJECT TO M.O.Q.
2016-08-09T12:20:04+00:00

MIL-C-5015 Connector

The “granddaddy” of all the Military Connector ranges. One of the most versatile Military Connectors on the market which is used in such disparate industries from welding to aircraft instrumentation. Known under part numbers: 97/MS/DMS/CMS/YH/SBMS.

They can be supplied both non and environmentally sealed. A much loved, readily available and inexpensive connector, which can be provided with both crimp and solder connections and with a threaded or bayonet locknut. For further information, please see our MIL-C-5015 Connectors page here

2016-08-09T12:15:26+00:00

ARINC 400 SERIES

A connector known as a rack and panel, has been used in the aviation industry for some 40 years and is still a firm favourite with customers. This can be supplied in a number of shells and different insert arrangements and is available in olive drab or nickel finish. Known under part numbers such as: DPX/DPXB/DPX2/DPX3. The Military Connectors shown in this section of our web site form a small section of those available and are fully traceable manufactured by well known companies in the USA.